 
BES-1216AC
FEATURES:
- Single-head
cylinder arm
- 12
needles
- Automatic
colour change
- Quick-change
270° cap system
- Jumbo
bobbin
- Cam-driven,
single presser foot for fast, quit operation
- Noise
reduction feed mechanism
- Automatic
lubrication system
- Automatic
top and bottom thread trimmers
- Maximum
sewing speed of 1,200 rpm
- Adjustable
tubular frame holder
- Narrow
machine design: machine will fit through a
32" door opening (with table assemblies
removed)
- Trace
mode for verifying location of designs before
sewing
- Built-in
3.5" floppy disk drive enables the machine
to run as an independent stand-alone unit
and able to read all popular
- embroidery
machine formats
- Machine
memory of 16 designs (a total of 27,000 stitches)
- Back
up or move forward through the design in increments
of 1, or 100 stitches or by colour changes
- Capable
of sewing flat, tubular and finished cap items
- Memory
retention after machine shut-off
AUTOMATIC
LUBRICATION SYSTEM
Brothers unique wick oiling system significantly
reduces machine maintenance downtime. Oil is
poured into a conveniently located reservoir
on the machine and a wick that is threaded through
the internal workings of the sewing head delivers
oil when and where it is needed, eliminating
the time consuming task of oiling numerous,
hard to reach locations.
SINGLE,
CAM DRIVEN PRESSER FOOT
Developed by Brother, the cam-driven presser
foot allows the machine to run faster and quieter.
The precise movement of the cam reacts faster
than the previous spring loaded technology and
reduces the noisy pounding of the presser foot
on the throat plate. The single presser foot
also facilitates increased machine speed and
less maintenance.
JUMBO
BOBBIN
Maximize system productivity with fewer bobbin
changes with the larger capacity, jumbo "M"
style bobbins. Brother perfected the performance
of the jumbo bobbin by designing the cams and
gears inside the sewing head to accommodate
the longer rotation of the larger bobbin.
EASY
TO USE CONTROL PANEL
Start sewing faster with the single, logical
commands found on the control panel. For example,
the hoop feed button moves the pantograph out
from under the needles for trouble free appliqué
placement and easier loading and unloading of
hoops.
MEMORY
RETENTION
Resume stitching a partially complete design
after the machine has been turned off, unplugged
or even after a power failure. Shut the machine
off to work with a customer, go home for the
evening or even move the machine across town
and never lose a stitch or go off registration
- another Brother first.
INDIVIDUAL
CAP FRAME ADJUSTMENT
Adjust the centre point of the cap on each head
independently while it's in the frame and mounted
on the machine. Eliminate off centre designs
and time consuming framing adjustments with
this advanced cap frame driver design.
|
